02 May 2008

DIY: Embossed Wall

DIY: The Embossed Wall


As you know this week Jessie and I were busy working on the kitchen. We did a lot of painting and something a friend taught me. I like to call it wall embossing. Don't know how to emboss a wall? Well, today is your lucky day!

You will need: Stencils, craft knife, pencil, putty knife, painters tape, paint rollers, paint brushes, paint, and dry time spackle.

Pick a Pattern. First off, you need to decide what you are going to emboss on your walls. We picked maple leaves. But be creative, you can use a fleur-de-lis, a daisy, or a bird. Doing a child's room? How about cars, trucks, stars, or fairies?

Get a Stencil. After you have chosen a pattern you need to find a stencil. If you can't find exactly what you are looking for, it is easy to create your own. Simply trace your pattern onto a blank stencil sheet and cut it out with a craft knife. We cut out four maple leaves in various sizes.

Prepare the walls. We will be spackling and painting so give the walls a quick wash and remove any wall plates that might get hit with the roller. Don't tape off yet! If you put the tape on too early, it is harder to remove when you are done.

Outline. Take a pencil and lightly mark where you are going to be stenciling. We wanted the leaves to be placed on our wall in a tree branch pattern and drew lines accordingly. If you want your pattern to be placed on the wall at specific intervals, make sure to mark it off. Depending on how precise you want your pattern to be, you may want to use a ruler and a level.

Spackle Your Design. Grab your putty knife, it's time to spackle! We suggest using dry time indicator spackling. It goes on pink and dries white. The pink color makes it easier to see the design as you're putting it on.

Firmly hold the stencil in place, using your putty knife spread the spackle across the stencil. It works best to spread from the outside of the stencil in. If you want a more worn or rustic look, you can try filling in only part of the stencil. Have fun with this part! If you don't like it, scrape it off and try again.

Let it Dry. While your spackling dries, use painters tape to tape off any door jams, baseboards, ceilings or walls you don't want to get paint on.

Sand. Once the spackle designs are completely dry you will want to sand them. At this point the spackle is still fragile, so use a fine grit sand paper. Sand just enough to get rid of any sharp edges. You will want to leave some of the texture, as it adds to the look.

Paint. Now it is time to paint your walls. Make sure to use a primer if needed. If you find that your spackling is coming off during the painting process, spray it with a little varnish first. Remember to remove the painters tape while the paint is slightly tacky. Don't wait too long or you'll be needing that craft knife to remove it.

Details. Once the paint is dry, feel free to highlight your embossing with little bit of color. You can do this by rubbing a small amount of paint onto the embossed area, then wiping it off with a dry rag. However, don't go overboard, the embossing should be subtle.

5 comments:

Anonymous said...

Can you put up a picture that was taken from a distance? I want to see how subtle it is.

Juliette said...

Looks good! I've actually never heard of it before.

Anonymous said...

guess which picture has beth's hands and which one has jessie's. :)

Unknown said...

anonymous-- will do.

Juliette-- thanks!

A'mooh-- I'd like to pretend that mine are the gorgeous tan ones. Please don't ruin that fantasy for me.

Anonymous said...

i want to think that those leaves are the ones that i did, but i am pretty sure they are not :)